pH 0-6 Test Strips

pH 0-6 Test Strips

  • Resealable ziplock bag
  • Water-resistant color chart
  • Customizable label
  • 50 test strips
  • Bulk quantities available

Product Description

pH 0-6 Test Strips

The pH 0-6 test strips test acidic solutions in 0.5 pH unit increments: 0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0.

Instructions:

  1. Remove one test strip from the bag, holding one end of the strip between your index finger and thumb. Do not touch the test pad with your fingers.
  2. Dip the test strip about 1/2″ into the solution to be tested for 1-2 seconds.
  3. Remove and shake off any excess liquid.
  4. Compare immediately to the color chart. Do not allow the test strip to dry before reading against the color chart.

PH0060, pH 0-6, pH 0-6 Test Strips, pH test strips, pH 0-6 test strip

Disclaimer: Precision Laboratories products are not approved for use as medical devices. Products and product information is for informational purposes only and not intended for use to diagnose, treat, cure or prevent any medical condition. Consult a medical doctor when needed.

PH0060; PH0060-1B-50; PH0060-12B-50

Additional Information

Bag Dimensions:

3" (W) x 4" (H) [76mm (W) x 102mm (H)] (Clear)

Strip Dimensions:

2.5" (L) x .1875" (W) [64mm (L) x 5mm (W)]

Shelf-Life:

3 Years Minimum

Item # (1):

PH0060-1B-50 (1 bag, 50 strips/bag)

Item # (2):

PH0060-12B-50 (12 bags, 50 strips/bag)

Product Documentation